From HoD’s Desk
Greetings!
The month of August brings
festivals and holidays. These holidays are considered while preparing the
academic calendar of the department and the institute and completion of the
curriculum are ensured. Generally by the end of August 30-40% syllabus is
completed. This month we focussed to build the competence of the final-year
students related to project understanding and create awareness about the other activities
for Second year and third-year students to increase their participation. Faculty
members also visited some industries for identifying opportunities for collaboration.
Every year the campus placement in August is very less. But, this year we have
seen remarkable improvement. Hope to see the highest placement for this batch.
Department Events
Expert session on 'Technology Driven Solutions to Social Problems' on 4th August 2022
The
Department has organized an Expert lecture on “Technology Driven Solutions to Social Problems" for final year students of Division A and B and staff of the department on 04/8/2022.
The resource person was Mr. Prashant Bachhav, Owner of Arya Technologies, Nashik. The total number of students
attending the session is 111. This lecture helped students to identify the
social problems for the final year project.
Expert session on ‘Instrument Transformers’ on 12th August 2022
An
Expert online lecture
was arranged by IET On-Campus of the electrical department on “Instrument Transformers" for TE and BE Electrical Division: A and B students and staff of the
department on 12/8/2022. The resource person was “Mrs. Ashwini Mayur, Associate Engineer, ABB Ltd., Chennai, India. The total number of students present =
102. This lecture helped students to acquire
knowledge on the construction and working of instrument transformers.
Expert session on 'Opportunities in Industrial Process Automation' on 26th August 2022
An
expert lecture was arranged by the electrical department on “Opportunities in Industrial Process Automation” for BE Electrical Division: A and B students and staff of the
department on 26/8/2022. The resource person was Mr. Anand Thakar, Principal Consultant from CADCAMGURU, Pune. The total number of students
present = 122. This lecture helped students to
acquire knowledge in the area of Industrial
Process Automation and related opportunities.
Celebration of World Photograph Day (19th August)
"EFFECT Students
Body” and "AVISHKAR" Celebrated ‘World
Photograph Day’ on 19th August 2022. In this, students were
asked to take beautiful photographs of the campus.
Student Corner
Student Placement
The following students are placed in various
multinational companies. Congratulations to all the students
|
Sr. No. |
Name of the Student |
Placement Date |
Batch |
|
1.
|
Aditya
Narsinh Koli |
03/08/2022 |
2022-23 |
|
2.
|
Krishna
Rajaram Chavan |
03/08/2022 |
2022-23 |
|
3.
|
Maitreya
Kasture |
03/08/2022 |
2022-23 |
|
4.
|
Mayuri
Hiralal Kumavat |
03/08/2022 |
2022-23 |
|
5.
|
Mrunal Anil
Shelar |
03/08/2022 |
2022-23 |
|
6.
|
Piyush
Bharat Barhate |
03/08/2022 |
2022-23 |
|
7.
|
Prathmesh
Prabhakar Patil |
03/08/2022 |
2022-23 |
|
8.
|
Purva
Narendra Sonawane |
03/08/2022 |
2022-23 |
|
9.
|
Sonali
Ramdas Kute |
03/08/2022 |
2022-23 |
|
10. |
Sanjana
Mukund Kulkarni |
03/08/2022 |
2022-23 |
|
11. |
Shubham Anil
Bhalerao |
03/08/2022 |
2022-23 |
|
12. |
Somesh Babasaheb Khavane |
03/08/2022 |
2022-23 |
|
13. |
Aakanksha
Gorakh Bhoir |
03/08/2022 |
2022-23 |
|
14. |
Harshal
Ashwin Wagulde |
03/08/2022 |
2022-23 |
|
15. |
Jayesh
Ravindra Chikhalkar |
03/08/2022 |
2022-23 |
|
16. |
Omkar Hemant
Gumbade |
03/08/2022 |
2022-23 |
|
17. |
Pranjal
Rajesh Jain |
03/08/2022 |
2022-23 |
|
18. |
Rahul Ramdas
Shinde |
03/08/2022 |
2022-23 |
|
19. |
Rohan
Santosh Wasu |
03/08/2022 |
2022-23 |
|
20. |
Sakshi
Khanderao Sabale |
03/08/2022 |
2022-23 |
|
21. |
Shraddha
Kishor Jadhav |
03/08/2022 |
2022-23 |
Student Achievements
Congratulations to Gayatri Gorakh Jadhav, Suchit Popat Khaire, and Surabhi Satish Sabale who are part of Team Brahmastra Quad Torc for AIR 1 Champion Overall at ISNEE Season 8th Quad Torc 2022.
Our Students' Participation in Eco-Friendly Ganesha Making Workshop. The event is co-coordinated by Prof. Pooja Sapkade from the department.
Electrical department student Atharv Deshmukh (TE-A) has participated
in the ‘Smart India Hackathon 2022’
of team ‘Netra’ and won 1st prize with Rs. 1,00,000 for
his problem statement under the guidance of Prof. Jaydeep Shah.
Electrical department students Aarambh Ahire, Vrushali Bangar, Pranjal Jain and Tejas Rayte (BE-B) have participated in ‘Smart India Hackathon 2022’ of team ‘Sanrakshan’ under the guidance of Prof. Priya Vyavahare.
Student Publication
1. Chetan
Gavate, Sayali Ingale, Yadnesh Joshi, Sharvari Phase, & P. N. Rao. (2022).
Industrial Power Monitoring and Load Controlling System. Recent Trends in
Control and Converter, 5(2), 1–6. https://doi.org/10.5281/zenodo.7033902
Faculty Corner
Faculty Participations
Prof. Dr. R. K. Munje and Prof. M. P. Thakre along with Prof. Morade, Prof. Barahate, and Prof. Khond visited Impact Automotive Solution Limited, Pune on 2nd August 2022.
Congratulations to Prof.
J. P. Shah is now a Certified Space Tutor of ISRO.
Industrial
Training/Courses done by staff during August 2022
|
Name
of Faculty |
Title of Event |
Duration |
Type
of Event |
Organized by |
|
Prof. Prajakta V. Dhole |
Implementation of NEP with respect to Global Outreach
of Higher Education |
1 day |
Workshop |
UGC-Human Resource Development Centre, Savitribai
Phule Pune University |
Faculty Publications
1 Shriwastava, R., Thakare, M., Bhadane, K., Harne, M.,
& Wagh, N. (2022). Performance enhancement of DCMLI fed DTC-PMSM drive in
electric vehicle. Bulletin of Electrical Engineering and Informatics, 11(4),
1867-1881. doi:https://doi.org/10.11591/eei.v11i4.3714
2. Nishant P. Matale, Mohan P. Thakre, Payal S. Borse (2022),
A seven-level cascaded multilevel inverter based on simplified SVPWM method.
International Journal of Engineering, Science and Technology. Vol. 14 No. 3,
DOI: 10.4314/ijest.v14i3.10S
3.Payal S. Borse, Mohan P. Thakre, Nishant P. Matale
(2022). 5-level torque-hysteresis controller for DTC-based IM drive.
International Journal of Engineering, Science and Technology. Vol. 14 No.
3, DOI: 10.4314/ijest.v14i3.12S
4. Kishor V. Bhadane, Mohan Thakre, Rakesh Shriwastava, Deepak P. Kadam, Dnyaneshwar V. Bhadane, Mahesh Harne(2022). Power quality improvement of wind energy system using energy storage model and DSTATCOM. Vol 11, No 3. International Journal of Applied Power Engineering (IJAPE). DOI: http://doi.org/10.11591/ijape.v11.i3.pp209-217
Student Articles
Causes behind the failure of the Distribution Transformer
Lavanya
Chaudhari, SE (Electrical), Div. B
lavanyachaudhari2004@gmail.com
India is a developing country, and
electricity plays a vital role in the development of India. The generation of
electric power is essential, but the distribution of electric power to provide
reliable power cannot be ignored. In the distribution system, the distribution
transformer plays an important role. The study involves reasons for failures
due to internal construction features of the distribution transformer &
external parameters attributing to the failure of the distribution transformer,
respectively.
The main parts of the distribution
transformer are the core, winding, transformer oil, main tank, breather,
cooling, radiator, and bushings. A laminated core is a magnetic material in
which the transformer winding is wound, which provides necessary magnetic
circuits. This is dipped in transformer oil, which is stored in the main tank.
Radiators are used in the transformer to cool the transformer oil and reduce
the winding temperature under loading conditions on the top of the transformer
tank.
Buchholz relay acts as a protective
device used to connect the conservator tank with the main tank. The bushing is
an insulator put on the top of the transformer tank through which the external
three-core cable is connected to the transformer and provides step-down voltage
through four-core cables (RYBN).
Transformer
Core Failure: The transformer core is designed to
provide a path for the magnetic field to flow around, which is necessary to
induce the voltage between the two windings. The core acts as a support to the
winding in the transformer. It also provides a low reluctance path to the flow
of magnetic flux. The function of the core is to concentrate the magnetic flux;
if a fault occurs in the core, it directly affects the transformer windings. It
gets damaged due to some reasons like low maintenance, old oil, and corrosion.
Suppose the lamination of the core gets damaged. In that case, it will increase
the eddy current, which is directly proportional to thermal heat & due to
this thermal heat, the distribution transformer gets damaged.
Transformers
Winding Failure: Transformers have mainly
two types of winding, Primary winding and Secondary winding. The primary
winding is used to take power from the source, and the secondary winding is
used to transfer changed voltage to the load. The windings suffer from three
types of stresses during transferring high voltage/low current are dielectric
stress, thermal stress, and mechanical stress. The faults that occur in the
winding due to these stresses cause failure winding and the breaking of winding
or burn out.
Transformer
Tank Failure: The transformer tank contains the
transformer oil and protects the core & windings from external conditions
like lightning, dust, rain, etc. Because of corrosion, environmental stress,
high humidity, etc. cracks in the wall of tanks occur, leading to leakage of oil,
which finally results in a reduction in oil quantity. From this leakage &
reduction of oil, there is a reduction of insulation in the winding. Due to
this, the temperature of the distribution transformer increases during the
operation and may damage the transformer.
Conservator
Tank Failure: This is a cylindrical tank that is mounted on
the top of the main transformer tank. The conservator tank is half-filled with
transformer oil. When the transformer’s load is increased, the temperature of
oil also increases then the conservator tank absorbs the volume of increased
oil in its upper space. The conservator tank’s primary function is to provide
sufficient space for spreading the oil inside the transformer (known as the
breathing of the transformer). If there is any fault in the conservator tank,
it cannot absorb the increased oil volume in its free upper space, and the tank
will burst due to high oil pressure at full loading conditions.
Buchholz
Relay Failure: Buchholz relay acted as a
protective device and is used to sense the faults due to high temperature
inside the transformer, and it is connected between the main tank and
conservator tank. It is a type of gas and oil-activated relay. When the
temperature of the main tank’s oil is increased, the oil evaporates in the form
of gas. When the gases are produced in large amounts, the Buchholz relay
detects the failure and gives the alarm. The transformer is disconnected from
the main supply for maintenance. If the Buchholz relay fails, it will not
detect the fault, then gas moves upward, and the alarm doesn’t work due to this
transformer going into a danger zone, and the transformer will get damaged due
to high oil pressure.
Explosion
Vent Failure: The purpose of the explosion vent
in a transformer is to prevent damage to the transformer tank by releasing any
excessive pressure generated inside the transformer. It is also a transformer’s
safety device, which protects the transformer tank from the high consequences
of the high-pressure gases induced in the transformer. It allows the gas to
escape by puncturing the diaphragm. The explosion vent’s failure will be why a
transformer fails during the system’s fault.
Breather
Failure: Whenever the transformer is under full
load condition, the transformer’s insulating oil gets heated, and the
temperature of the insulating oil increases, and thus the volume of the oil
increases. As the oil volume is increased, the air above the oil level in the
conservator tank will come out. The breather acts like an air filter for the
transformer and controls the moisture level inside the transformer. It will not
absorb moisture present in the air of the tank due to which moisture and dust
are added to the oil and that oil will lose its dielectric properties, and the
transformer will get damaged.
Radiator
Failure: The radiator is a collection of hollow
pipelines used to transfer thermal energy from one medium to another for
cooling. Radiators are used for cooling the transformer oil, which reduces the
winding temperature under loading conditions. The radiators are connected to
the transformer through the pipeline at the transformer’s upper and lower
sides. If radiators get damaged, it will not cool down the temperature of
transformer oil with the help of atmospheric air, due to which the temperature
of the oil will increase and may become the cause of failure.
Bushing
Failure: The bushing of the transformer is a type
of porcelain insulator put on the top of the transformer tank through which
connections are made to the external circuit. Bushings consist of a
current-carrying part of the conducting rod in the center, a porcelain cylinder
installed in a hole on the transformer cover, and insulation of the
current-carrying part. The primary failure mode of the bushing is a short
circuit. It may be due to material fault in the insulator or due to mechanical
damage. However, the cracks in the porcelain and water ingress inside the
insulation of the bushing may lead to this failure.
Opportunities after GATE Exam-Career Scope & Salary Benefits
Hiten
Somnath Dhatrak, SE (Electrical), DIV A
hitendhatrak111@gmail.com
INTRODUCTION:
GATE is a reputed all-India
examination, administered and conducted jointly by the Indian Institute of
Science (IISc) and seven of the Indian Institutes of Technology (ITs) on behalf
of the National Coordination Board - GATE, Department of Higher Education,
Ministry of Education (MOE) and the Government of India. There is a
never-ending loop when we try to figure out what we want to do for the next
step and the opportunities after the GATE exam. Here, let's analyze all such
opportunities after the GATE exam in the sections below.
Many candidates look for the right
direction for the best opportunities after clearing the GATE exam. There are
various programs, PSUs, and other categories where any GATE aspirants can fulfill
their criteria. Thus in this article, we have provided a list of some crucial
opportunities after the GATE exam where aspirants can participate.
Here are some opportunities after the
GATE exam that candidates can pursue. These can differ from candidate to
candidate choice in which field they want to make their career. GATE is the
gateway to many opportunities, shared in brief and explanatory ways in the
article below.
Private
Jobs after GATE: Many private companies, which are
multinational companies, GATE-qualified Mech, passed out candidates for their
professional research posts.
Research
Opportunities: Candidates can become a scientist,
and the GATE exam is the entrance to the job. Candidates can earn degrees from
ITs and NITs only by GATE score and apply to various scientific departments of
different research centers in India.
Scholarships
Programs: The benefits of the GATE exam are not
just good job opportunities. With a valid GATE score, a candidate can also get
scholarships for higher studies. A monthly stipend of 12,400 rupees is provided
to GATE-qualified candidates when they pursue the M.Tech/M.Pharm/M.Arch.
Degrees.
Foreign
Universities: GATE is a chance to fulfill the
aspiration of pursuing higher studies from foreign universities. GATE Scorecard
can aid you in applying to foreign universities for higher studies.
Postgraduate
Entrance (M.Tech): Candidates might
consider various opportunities after GATE exam, including higher studies after
graduation, and M.Tech is the most popular option for engineering students. It
will provide expertise in your area so you can get a good job anywhere. In addition,
most companies search for postgraduates who are better at problem-solving
skills. Although you will get many more opportunities after graduation, a
master’s degree will gradually increase your job opportunities and give you a
job in reputed MNCs. GATE scorecard is valid for M.Tech admission for 3 years.
Different
benefits of the M.Tech program are:
Some of the top companies hire from
institutes like IIT and NIT. They look for students with experience, and
experience can come after you finish your M.Tech. Higher pay packages for Faculty/Research
positions in educational institutes and most of the RD centers.
Public
Sector Undertakings (PSUs)
The GATE exam became hype after
various public-sector units (PSUs) signed a memorandum of understanding (MOU)
with IITs for recruitment through GATE. So, clearing the GATE examination can
help you get government sector jobs.
Various PSUs use the GATE Scorecard
for hiring candidates. PSUs like ONGC, GAIL, IOCL, PGCIL, NLC, NTPC, and NLC
hire through GATE Scores followed by Group discussions, Personal Interviews,
and Group tasks. Even DRDO sometimes recruits through GATE Scores. Else it will
conduct its written test. Some PSUs like SAIL, ISRO, VIZAG, BEL, and BSNL.
Ph.D.
Entrance Exam
A Master’s degree leads to specialization,
cultivates, and brings out the best of your interest in a certain area which
may further interest you in research/Ph.D. Moreover, based on the GATE score,
some foreign universities (Like NTU and Singapore) offer Ph.D. positions
without a GRE score. The recruitment process for the Ph.D. program includes a
valid GATE score and then facing an interview panel based on the respective
interest area.
Fellowship
Program in Management (FPM)
It is a five-year program run at
IIMs. This program has the following features: A monthly stipend is offered of
₹ 29,000-30,000. No tuition fees for almost four years and nine months.
Students who live off-campus will get a house-rent allowance (HRA) of ₹ 8,000
for a single student and ₹ 13,000 for married students.
Research
Opportunities
GATE-qualified students are also eligible for the award of a Junior Research Fellowship in CSIR Laboratories and CSIR-sponsored projects. The most searched opportunity after the GATE exam is research. Some particular research positions are available through GATE at Bhabha Atomic Research Center (BARC). However, BARC conducts its examination for recruitment. Also, industries like ISRO conduct their exams similarly to GATE.
About Newsletter
Declaration
Content in the e-Newsletter is compiled by Prof. Dr. R. K. Munje. Suggestions and inputs leading to the improvement of this newsletter are highly welcomed. Please write to engg-hod-elct@kkwagh.edu.in, rkmunje@kkwagh.edu.in
Newsletter Committee
Chief Editor: Dr. Ravindra K. Munje, Professor and I/C HoD, Electrical Department
Staff Editors: Prof. S. Saravanan, Assistant Professor
Prof. Priya Vyavahare, Assistant Professor
Student Editors:
Vaibhav
Dhanokar (BE-A)
Huzaif Sayyed (BE-A)
Hiten Somnath (SE A)
Shubham Manoj (SE A)
Bhausaheb Shraddha (SE A)
Rajendra Mansi (SE A)
Choudhari Rohan (SE A)
Please follow us on the
Facebook: https://www.facebook.com/electrical.engg.kkwagh/
Blog: https://electricalkkwieer.blogspot.com/
YouTube: https://www.youtube.com/channel/UC08p5pixINTipmb2qv2IDkQ
Telegram: https://t.me/eekkwiee
No comments:
Post a Comment